New

Adonis Samson - 6KVA UPS

NZ$4,346.96

Adonis Samson is a 6KVA UPS designed for heavy workloads and Data centers. Samson provides up to 4800Watts of power in a true online ups flow. True Online battery load prevents spikes, outages, and drop offs caused by power to battery switching.

Specific References

Qty :
Available for Backorder

Adonis Samson is a 6KVA UPS designed for heavy workloads and Data centers. Samson provides up to 4800Watts of power in a true online ups flow. True Online battery load prevents spikes, outages, and drop offs caused by power to battery switching.

Adonis Samson incorporates double-conversion inverter technology eliminating all mains power disturbances. A rectifier converts the alternating current from the utility power to direct current which is used to charge the batteries and power the inverter that then generates a true online sinusoidal AC voltage into the inverter to power the load.

Adonis Samson provides perfect protection specifically for computer equipment, Communication systems, and sensitive computerized instruments.

With a easy read LCD display, input and output voltage and frequency can be viewed alongside load level and batter charge level.

Model

Samson C6K

Rated output capacity

6kVA/4800W

 

Rated voltage

220Vac

Rated frequency

50Hz

Input voltage range

(120~275)VAC +/- 5%

Input frequency range

45-55 +/- 0.5Hz

Bypass voltage

80VAC
145VAC

Battery input

Battery voltage

12VDC/*7AH*16

Battery section number

16

Backup time (Approximate values only. Results will vary based on load average)

1/4 Load ~ 50 mins

Half load ~ 10 to 20 mins

full load ~ 5 mins

Boot input maximum impact current

< Rated current 150%

Battery charge time

5 hours to 90%

AC output

Output mode

Single phase

Output voltage

220Vac +/- 3%(inverter output)

Output frequency

50/60Hz +/- 5Hz(Normal AC input)

50/60 Hz +/- 1%

Dynamic voltage transients

< 5%

Dynamic transient recovery time

< 60ms

Wave

Sine wave THD < 3% (linear load)

Sine wave THD <8% (nonlinear load)

Output power factor

0.8

Overload capacity

130% of Load

Recovery point is 90% load

Peak coefficient of output current

3:1

Reverse to bypass conversion time

< 4ms

Communication and monitoring function

RS232

Weight (net weight)/(gross weight)

58KG / 61KG

Size (UPS)

248*500*616 (mm)

Dimension (packing) (W*D*H, mm)

320*650*750 (mm)

Certification

CE EN 62040-1:2008
Test report SZZCT1504080B-LVD-01

Warranty - Return to base

3 Years

UPS install should be undertaken by qualified electricians. Load capacity draw is equal to input capacity. Unit will run on standard input loading to a 10A fuse provided that output load is no more than 2200W. Purchasers must make sure that the fuse loading and cabling are sufficient to run the output load. If running a full 4800W load, installer must make sure that proper electrical wiring is installed to cabling sufficient to handle 40A connected to a 32A fuse.

Specific References