New

Adonis Samson Jr - 1KVA UPS

NZ$650.00

Adonis Samson Jr is a 1KVA UPS designed for office and small server workloads. Samson Jr provides up to 800Watts of power in a true online ups flow. True Online battery load prevents spikes, outages, and drop offs caused by power to battery switching.

Specific References

Qty :
Available for Backorder

Adonis Samson Jr is a 1KVA UPS designed for office and small server workloads. Samson Jr provides up to 800Watts of power in a true online ups flow. True Online battery load prevents spikes, outages, and drop offs caused by power to battery switching.

Adonis Samson UPS's incorporate double-conversion inverter technology eliminating all mains power disturbances. A rectifier converts the alternating current from the utility power to direct current which is used to charge the batteries and power the inverter that then generates a true online sinusoidal AC voltage into the inverter to power the load.

Adonis Samson Jr provides perfect protection specifically for computer equipment, Communication systems, and sensitive computerized instruments.

With a easy read LCD display, input and output voltage and frequency can be viewed alongside load level and batter charge level.

Model

Samson Jr C1K

Rated output capacity

1kVA/800W

 

Rated voltage

220Vac

Rated frequency

50Hz

Input voltage range

(115~300)VAC +/- 5%

Input frequency range

45-55 Hzplusmn0.5Hz

AC output

Output mode

Single phase

Output voltage

220Vac +/- 3%(inverter output)

Output frequency

50/60Hz +/- 5Hz(Normal AC input)

50/60 Hz +/- 1%

Communication and monitoring function

RS232

Weight (net weight)/(gross weight)

6.5KG

Size (UPS)

360x145x215 (mm)

Certification

CE EN 62040-1:2008
Test report SZZCT1504080B-LVD-01

Warranty - Return to base

3 Years

UPS install should be undertaken by qualified electricians. Load capacity draw is equal to input capacity. Unit will run on standard input loading to a 10A fuse provided that output load is no more than 2200W. Purchasers must make sure that the fuse loading and cabling are sufficient to run the output load. If running a full 800W load, installer must make sure that proper electrical wiring is installed to cabling sufficient to handle 10A connected to a 16A fuse.

Specific References